NeuLog Conductivity Logger Sensor

This conductivity logger sensor uses a probe with two flat electrodes of known surface area and spacing. A signal is supplied to the electrodes, and the sensor calculates the conductivity of the solution based on signal behavior. The sensor offers three display ranges: microseconds per centimeter, milligrams per liter, and parts per million. Operating ranges include 0-2000 and 2000-20000 microseconds/cm, 0-1000 and 1000-18000 mg/L, and 0-1000 and 1000-18000 ppm, all at 10-bit ADC resolution with a maximum sample rate of 100 samples per second. Experiment duration can be set from 1 second to 31 days. Connection hardware is required but sold separately.